SAVVKu Explosion-Proof Cable Glands for Armoured Cables in in Flexible Metallic Conduit or Conduit Connection
SAVVKu explosion-proof cable glands are intended for the entry of armoured and non-armoured cables in flexible metallic conduit into the enclosures of explosion-proof electrical equipment installed indoors or outdoors, as well as on offshore platforms and port terminals, in hazardous areas with explosive atmospheres or combustible dust.
Technical Specifications
| Explosion Protection Markings: | |
| Gas Markings: | 1ExdIICGb X, 1ExeIIGb X, 2ExnRIICGc X |
| Dust Markings: | ExtaIIICDa X |
| Ingress Protection: | IP 66/67/68 |
| Permissible Ambient Temperature: | from -60 to +130ºС -80….+250 С (special design) |
| Gland Material: | Nickel-plated brass (by default)/ Stainless steel (-N) Aluminium (-А) |
| Sealing Ring Material | Silicone |
| Sealing Type | Compression dynamic seal |
|
Code |
Thread Type M |
Thread Type G, K (Optional) |
Inner Cable Ø, mm |
Outer Cable Ø, mm |
Flexible Metallic Conduit Diameter |
Type of Flexible Metallic Conduit* |
Across Flats Sw |
Total Length TL |
Thread Length L, mm for M / G / NPT Types |
|
SAVVKu-16 |
M16 |
3/8″ |
4-9 |
9 |
9,1/15 |
RZ TsKh 10, MRPI 10 |
24 |
73 |
15 / 16 / 17 |
|
SAVVKu-16 (12 mr) |
M16 |
3/8″ |
4-10 |
11 |
10,9/18 |
RZ TsKh 12, MRPI 12 |
24 |
73 |
15 / 16 / 17 |
|
SAVVKu-20 |
M20 |
1/2” |
5,5-14 |
14 |
14/21,5 |
RZ TsKh 15 MRPI 15, GERDA-MG-15, GERDA-MG-16 |
32 |
79 |
15 / 16 / 17 |
|
SAVVKu-20 (20 mr) |
M20 |
1/2” |
5,5-14 |
18,7 |
18,7/27 |
RZ TsKh 20 MRPI 20, RZ TsKh 22 MRPI 22, GERDA-MG-22, GERDA-MG-22 |
36 |
79 |
15 / 16 / 17 |
|
SAVVKu-25 |
M25 |
3/4” |
8-18 |
18,7 |
RZ TsKh 20 MRPI 20, RZ TsKh 22 MRPI 22, GERDA-MG-22, GERDA-MG-22 |
36 |
79 |
15 / 16 / 17 |
|
|
SAVVKu-25 (25 mr) |
M25 |
3/4” |
8-18 |
23,7 |
23,7/33,1 |
RZ TsKh 25 MRPI 25, GERDA-MG-25 |
42 |
79 |
15 / 16 / 17 |
|
SAVVKu-32 |
M32 |
1” |
13-24 |
23,7 |
30,4/42 |
RZ TsKh 25 MRPI 25, GERDA-MG-25 |
42 |
98 |
15 / 20,5 / 21 |
|
SAVVKu-32 (32 mr) |
M32 |
1” |
13-24 |
30,4 |
RZ TsKh 32 MRPI 32, GERDA-MG-32 |
48 |
98 |
15 / 20,5 / 21 |
|
|
SAVVKu-40 |
M40 |
1 1/4” |
21-30 |
30,4 |
36,4/47 |
RZ TsKh 32 MRPI 32, GERDA-MG-32 |
48 |
98 |
15 / 20,5 / 21 |
|
SAVVKu-40 (38 mr) |
M40 |
1 1/4” |
21-30 |
36,4 |
RZ TsKh 38 MRPI 38, GERDA-MG-38 |
55 |
98 |
15 / 20,5 / 21 |
|
|
SAVVKu-50 |
M50 |
1 1/2” |
24-36 |
36,4 |
46,5/61,5 |
RZ TsKh 38 MRPI 38, GERDA-MG-38 |
55 |
98 |
15 / 20,5 / 21 |
|
SAVVKu-50 (50 mr) |
M50 |
1 1/2” |
24-36 |
46,5 |
MRPI 50 |
68 |
98 |
15 / 20,5 / 21 |
|
|
SAVVKu-63 |
M63 |
2” |
36-45 |
46,5 |
58/70 |
MRPI 50 |
68 |
98 |
15 / 20,5 / 21 |
|
SAVVKu-63 (60 mr) |
M63 |
2” |
36-45 |
58 |
MRPI 60 |
76 |
98 |
15 / 20,5 / 21 |


SAVVKu – Х3 – Х4 – Х5 where
|
SA |
VVK |
u |
N |
20 |
M20х1.5 |
|
Х1 |
Х2 |
Х3 |
Х4 |
Х5 |
Here:
X1 – entering cable type: armoured in flexible metallic conduit (default) (SA);
VVK – product designation: "VVK" – explosion-proof cable glands;
Х2 – type of a cable gland sealing ring (u – sealing ring, m – one special elastic ring suitable for the entire cable diameter range);
Х3 – gland material: nickel-plated brass (default, no marking), N – stainless steel, L – bare brass, S – steel, SO – galvanized steel, A – aluminium. Similar materials may also be used;
Х4 – cable gland size;
Х5 – entry thread (metric thread M is indicated by default);
Explosion-Proof Cable Glands
Explosion-Proof Control Stations
Explosion-Proof Junction Boxes
Explosion-Proof Cabinets
Explosion-Proof Luminaires
Explosion-Proof and Industrial Enclosures
Explosion-Proof Controls